DIMENSIONS:
HEIGHT 4-7/8
WIDTH 7-1/2"
ANGLE 45o
WALL THICKNESS 3/8"
THROAT I.D. 1-3/4" DIA.
THROAT O.D. 3" DIA.
|
|
Funnel increases life of shot sleeve by interrupting free-fall drop of molten
aluminum, minimizing washout below pour hole.
Eliminates costly spillage - assuring full amount of aluminum to fill the cavity,
thereby reducing scrap percentage.
Excellent welding capabilities - steel casting - not cast iron.
Excellent for auto-ladle equipment.
Can be positioned directly over the pour spout. Maximum clearance required to
clear platen position 3/8" - clamp directly over the pour hole.
3" diameter outside throat dimension allows for further machining to suit
size of pour hole.
Funnel can be assembled on shot sleeve without requiring removal of shot
sleeve. Assembly time - approximately 5 to 10-minute maximum.
CUSTOMER COMMENTS:
"Great for us - the design lets us use a funnel where we never could with other designs"
"Just a darn good product that does what you said it would - it just keeps on working"
Reduce operator fatigue
Excellent adaptability - auto
ladle equipment
Quad-Cast steel casting -
not subject to chipping or
breakage
|
|
CUSTOMER COMMENTS:
"Doing a very commendable job"
"Long life - much easier for my hand operators to pour into large hole"
"Excellent weldability"
Excellent for automatic ladle
equipment
Not subject to cracking or
chipping
Funnels increase shot sleeve
life by interrupting free fall
height of molten aluminum,
thereby minimizing wash out
below the pour hole.
Eliminates costly spillage
|
|
CUSTOMER COMMENTS:
"Excellent - performing extremely well - long life"
"You cannot wear this thing out. You can't break it like the ceramic we used in the past."
"We would not run a die casting without a funnel on our shot sleeve."
|
